Cyprus

Innema Services Ltd

Building - Construction

Primary Responsibilities:1. Pre-Lift Preparation<ul><li>Inspect all rigging gear (slings, shackles, chains, hooks, etc.) for wear, damage, or defects.</li><li>Select proper rigging equipment based on load weight, shape, and center of gravity.</li><li>Calculate load weights and ensure crane capacity is not exceeded.</li><li>Conduct job hazard analysis (JHA) before any lift.</li><li>Review lift plans and site layout with the crane operator and site supervisor.</li><li>Verify ground conditions and ensure appropriate crane setup area.</li></ul>2. Rigging and Lifting Operations<ul><li>Attach rigging equipment to loads using appropriate hitches (choker, basket, vertical).</li><li>Ensure all loads are balanced and secure before lifting.</li><li>Direct crane operators using standard hand signals or radio communication.</li><li>Guide loads during lifts to avoid obstacles and ensure safe placement.</li><li>Tag lines must be used when required to control swinging loads.</li><li>Maintain safe working distances from power lines and other hazards.</li></ul>3. Safety and Compliance<ul><li>Follow all OSHA, ANSI, and site-specific safety regulations.</li><li>Attend toolbox talks and safety briefings.</li><li>Ensure exclusion zones are established around lift areas.</li><li>Stop operations immediately if any unsafe conditions are observed.</li><li>Maintain documentation for rigging equipment inspections.</li><li>Report incidents, near misses, or equipment failures to supervisors.</li></ul>4. Equipment Maintenance<ul><li>Perform daily and periodic inspections of rigging gear and lifting accessories.</li><li>Clean and store rigging equipment properly after use.</li><li>Report damaged or defective gear for replacement.</li><li>Maintain rigging logs and inspection records.</li></ul>5. Communication and Coordination<ul><li>Coordinate with crane operators, signalers, and ground personnel.</li><li>Interpret and understand lift plans and blueprints.</li><li>Work closely with site supervisors to plan complex lifts (e.g., tandem lifts).</li><li>Communicate hazards and site changes effectively.</li></ul>

Rigger - Slinger

Rigger - Slinger

RELATED JOBS